Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Registration plate issues | 8 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Stop lamp not working stop light inop on front brake and rear control (4.3.1 (a) (ii)) | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Position lamp not working Rear (4.2.1 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Rear pedal does not operate (4.3.2 (a) (iii)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp not working Rear |4.3.1 |a| |ii|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working Front switch (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure split pin missing o/s/r spindle (6.1.1 (b) (i)) | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Front Upper Horn not working |1.7.3a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear All direction indicators obviously incorrectly positioned rear only 100mm apart (4.4.3 (a)) | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls control 1. (4.3.2 (a) (iii)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 1 |
Brake pedal pivot excessively tight rear brake (1.1.1 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Wheel spindle loose insecure split pin missing (5.2.1 (c) (i)) | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |