Most common failures | No# failures |
---|
Headlamp aim out of alignment | 23 |
Registration plate issues | 17 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working |1.7.3a| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Registration plate lamp issues | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Exhaust has part of the system missing |7.1.1a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Riders seat insecure |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Direction indicator missing |1.5.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Direction indicator likely to become detached left hand front indicator loose (4.4.1 (c) (ii)) | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Central Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front Indicator switch does not operate the direction indicators on the side selected nearside & offside |1.5.4| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Rear Brake hose leaking (1.1.12 (c)) | 1 |
Brake performance not tested Due to fluid leak (1.2.1 (g)) | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
All direction indicators adversely affected by the operation of another lamp all indicators flashing at same time when switched from left to right . (4.4.3 (b)) | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Exhaust has a major leak of exhaust gases exhaust corroded and splitt (6.1.2 (a)) | 1 |
Rear brake binding | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front shock absorber seal failed and leaking oil both fork seals |2.3.3| | 1 |
Exhaust mounting missing rear mounting fouling swingarm |7.1.1c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension rear exhaust mounting fouling swingarm |2.4.A.3a| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Central Front Brake excessively binding (1.2.1 (f)) | 1 |
Central Rear Brake excessively binding (1.2.1 (f)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |