| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 35 |
| Registration plate issues | 17 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Brake excessively binding (1.2.1 (f)) | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Horn not working |1.7.3a| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Registration plate lamp issues | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Position lamp not working on dip (4.2.1 (a)) | 1 |
| Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Rear Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Rear Brake component inadequately mounted reaction bracket split pin missing. (1.1.21 (c)) | 1 |
| Front Brake component modification unsafe caliper seals not seated (1.1.21 (d) (i)) | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Upper Fork yoke insecure |2.2.2 |d| |i|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding Re adjusted (1.2.1 (f)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Pillion seat with a defective supporting structure (6.2.6 (a) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Upper Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Headlamp insecure headlamp frame inside headlamp was insecure (4.1.1 (c)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Throttle operating incorrectly throttle is sticking (6.2.7 (a) (i)) | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Exhaust system insecure (6.1.2 (a)) | 1 |
| Front Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Exhaust mounting missing |7.1.1c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Riders seat missing (6.2.5 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Brake cable badly frayed |3.2.A1b| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Brake master cylinder leaking Leaking at reservoir union. |1.1.10 |b| |ii|| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |