Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Registration plate issues | 17 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Horn not loud enough to be heard by another road user |1.7.3a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Horn not working |1.7.3a| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Drive chain worn to excess |6.2.1e| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 4 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Horn is not a constant note |1.7.3c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Central Front Inner Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Throttle operating incorrectly |6.2.1f| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Offside Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Rear Brake caliper(s) securing bolt(s) loose (3.2.A1j) | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Horn missing |1.7.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Steering headbearing excessively stiff or notchy slightly notchy (2.2.2 (f) (i)) | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
An item not tested |Manual| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Nearside Front Fuel system component leaking |7.2.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride chain link clip |6.2.1h| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Wheel corroded to the extent that the wheel could break up |5.2.2 |c| |ii|| | 1 |
Stop lamp not working Rear brake light switch broken - replaced |4.3.1 |a| |ii|| | 1 |