Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Registration plate issues | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Suspension arm pin or bush excessively worn swing arm bushes |5.3.4 |a| |i|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake pedal pivot has excessive free play (1.1.1 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |