| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 49 |
| Registration plate lamp issues | 16 |
| Horn not working (7.7 (a)) | 10 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 9 |
| Drive chain excessively loose |6.2.1d| | 9 |
| Front Position lamp not working (4.2.1 (a)) | 9 |
| Horn not working (7.7 (a) (ii)) | 7 |
| Rear reflector missing (4.8.2 (a) (ii)) | 7 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
| Front Position lamp not working |4.2.1 |a|| | 4 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Registration plate issues | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
| Horn not working |1.7.3a| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Nearside Front Footrest insecure |6.2.1a| | 3 |
| Horn not working |7.7 |a| |ii|| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
| Offside Rear Footrest missing (6.2.12 (a)) | 2 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front position lamp incorrect colour |1.1.2a| | 2 |
| Offside Front Brake disc contaminated oil on disc (1.1.14 (b)) | 1 |
| Front Shock absorber has a serious fluid leak both front fork seals leaking an contaminating front brakes (5.3.2 (b)) | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Fuel cap ineffective damaged seal (6.1.3 (b) (i)) | 1 |
| Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Stop lamp not working from front control (4.3.1 (a) (ii)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Stop lamp not working off front brake lever. (4.3.1 (a) (ii)) | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Position lamp not working disconnected wire now fixed (4.2.1 (a)) | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Central Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Drive chain horseshoe locking device likely to become detached missing (6.1.7 (j) (ii)) | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Stop lamp not working Front brake switch. (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Front Suspension component pin or bush excessively worn Fork bushes. (5.3.4 (a) (i)) | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Footrest missing both rear (6.2.12 (a)) | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Stop lamp not working Control (4.3.1 (a) (ii)) | 1 |
| Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Drive chain sprocket so worn it is likely to fail sprocket mounting bearing (6.1.7 (c) (ii)) | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Joining link clip missing |6.2.1h| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Rear Brake lagging in operation |1.2.1 |d|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Headlamp light intensity severely reduced dipped beam |4.1.4 |a|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Stop lamp switch with a delay in operation spring discconected (4.3.2 (a) (ii)) | 1 |
| Offside Handlebar deformed to the extent that steering is affected badly bent (2.2.1 (c) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Central Lower Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking on right hand lock (6.2.7 (a) (ii)) | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticking |6.2.7 |a| |ii|| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front All position lamps not working |4.2.1 |a|| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies FRONT BRAKE SWITCH FLICKERS |1.3.1a| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| An item not tested |Manual| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Central Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Front Upper Throttle operating incorrectly throttle not returning fully on R/H lock - adjusted to correct (6.2.7 (a) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition std pipe fitted at time test carbon can big hole (8.1.1 (a)) | 1 |
| Rear Stop lamp not working brake light switch sticking rear to master cylinder (4.3.1 (a) (ii)) | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |
| Rear Brake performance unable to be tested piston and pads excissvely corrded (1.2.1 (g)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Nearside Exhaust has a major leak of exhaust gases |at top of downpipe| |6.1.2 |a|| | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear Brake pedal insecure missing footrest / brake pedal bracket mounting bolt
other bolts finger tight (1.1.2 (e) (i)) | 1 |
| Nearside Front Headlamp switch faulty |1.2.4| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim projected beam image obviously incorrect LED bulb fitted (4.1.2 (c)) | 1 |
| Central Lower Exhaust has a major leak of exhaust gases both collector and down pipejoint corroded and broken (6.1.2 (a)) | 1 |
| Offside Handlebar grip insecure to handlebar Throttle Switch Gear free to rotate / insecure (2.2.1 (d) (ii)) | 1 |
| Rear Brake disc significantly and obviously worn 4.3mm measured , 4.5min (1.1.14 (a) (i)) | 1 |