MOT History from tests of petrol KAWASAKI KDX200s year 1991

Review the list of common KAWASAKI KDX200 failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history

Pass percent:71.88%

(The average a petrol KAWASAKI KDX200 year 1991 passes without issue)

Based on:64 MOT Tests

Most common failures	No# failures
Registration plate issues	4
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Front wheel bearings have excessive free play \|2.3.5b\|	2
Headlamp aim out of alignment	2
Horn not working \|1.7.3a\|	2
Front Horn not working \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Front wheel spindle securing nut\|s\| loose \|2.3.3a\|	1
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Drive chain worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Nearside Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Offside Rear Footrest missing \|6.2.1a\|	1
Horn missing \|1.7.1\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Wheel spoke cracked. \|4.2.1b\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Direction indicator missing \|1.5.1a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	4
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Front wheel bearings have excessive free play \|2.3.5b\|	2
Headlamp aim out of alignment	2
Horn not working \|1.7.3a\|	2
Front Horn not working \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Front wheel spindle securing nut\|s\| loose \|2.3.3a\|	1
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Drive chain worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Nearside Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Offside Rear Footrest missing \|6.2.1a\|	1
Horn missing \|1.7.1\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Wheel spoke cracked. \|4.2.1b\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Direction indicator missing \|1.5.1a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1

MOT History from tests of petrol KAWASAKI KDX200s year 1991

Find us on Facebook