| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 125 |
| Registration plate issues | 78 |
| Rear reflector on motorcycle missing |1.4.1| | 56 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 42 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 42 |
| Horn not working |1.7.3a| | 41 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 39 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 35 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 34 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 31 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 30 |
| Drive chain excessively loose |6.2.1d| | 29 |
| Front wheel bearings have excessive free play |2.3.5b| | 29 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 28 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 28 |
| Throttle operating incorrectly |6.2.1f| | 27 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 25 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 23 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 22 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 21 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 20 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 20 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 19 |
| Front wheel bearings are excessively rough |2.3.5b| | 18 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 18 |
| Drive chain worn to excess |6.2.1e| | 16 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 14 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 14 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 13 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 12 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 11 |
| Headlamp aim beam image kick up to the offside |1.6| | 11 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 11 |
| Direction indicators not working |1.5.1c| | 11 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 11 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 10 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 10 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 10 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 10 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 10 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Steering headbearing has excessive free play |2.2.2| | 9 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 8 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 8 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 8 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 8 |
| Riders seat insecure |6.2.1a| | 8 |
| Registration plate lamp issues | 8 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 7 |
| Brake lever has inadequate reserve travel |3.1.3b| | 7 |
| Offside Rear Direction indicator not working |1.5.1c| | 7 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 7 |
| Nearside Rear Direction indicator not working |1.5.1c| | 7 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Front position lamp incorrect colour |1.1.2a| | 6 |
| Front suspension has inadequate damping effect. |2.3.6c| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Offside Front Direction indicator not working |1.5.1c| | 6 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 6 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 6 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
| Stop lamp not working (4.3.1 (a) (ii)) | 6 |
| Offside Front Footrest insecure |6.2.1a| | 5 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 5 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Nearside Front Direction indicator not working |1.5.1c| | 5 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Offside Rear Direction indicators not working |1.5.1c| | 5 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Rear Drive chain excessively loose |6.2.1d| | 5 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
| Chain guard insecure |6.2.1c| | 4 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 4 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 4 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 4 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 4 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
| Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 4 |
| Brake locking device missing |3.2.A1e| | 4 |
| Rear Brake disc|s| cracked |3.2.A1g| | 4 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 4 |
| Nearside Rear Footrest insecure |6.2.1a| | 4 |
| Brake hose damaged | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Nearside Front Footrest insecure |6.2.1a| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Wheel spoke excessively loose |4.2.1b| | 3 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
| Brake performance not tested |3.3| | 3 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 3 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Direction indicator missing |1.5.1a| | 3 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Exhaust mounting missing |7.1.1c| | 3 |
| Offside Front Direction indicators not working |1.5.1c| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Handlebar mounting clamp loose |2.1.1a| | 3 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 3 |
| Front mudguard insecure |2.3.7| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |