Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Registration plate issues | 13 |
Throttle operating incorrectly |6.2.1f| | 12 |
Headlamp aim beam image kick up to the offside |1.6| | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Horn not working |1.7.3a| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Handlebar handgrip not secure to handlebars. l/h |2.1.1c| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Brake lever has inadequate reserve travel |9.3.1f| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Registration plate lamp issues | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Lower Motorcycle structure cracked |6.1.1a| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Front suspension assembly component cracked |2.3.1| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Front Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Front An item not tested |Manual| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
Offside Front Brake pipe inadequately clipped front to rear |3.6.B.1| | 1 |
Rear brake binding | 1 |
Offside Rear Brake pivot excessively damaged and seriously weakened |3.5.1e| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Upper Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Rear Upper Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Nearside Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear Rear suspension component cracked |2.4.A.1a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Exhaust has part of the system missing |7.1.1a| | 1 |
Nearside Lower Motorcycle structure adversely modified |6.1.1b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Position lamp switch insecure |1.1.4b| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |9.2.1a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Parking brake efficiency below requirements |3.7.B.7| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Rear Sub-frame modified and seriously weakened |2.4.A.2| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain clip wrong rotation |6.2.1h| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Position lamp switch insecure (4.2.2 (b)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Handlebar retaining device loose bar end caps at yoke (2.2.1 (b) (i)) | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |