Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Registration plate issues | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Horn not working |1.7.3a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Riders seat insecure |6.2.1a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Nearside Rear reflector missing |1.5.1a| | 2 |
Offside Rear reflector missing |1.5.1a| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Upper Fork yoke deformed |2.1.1b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Obligatory mirror missing |8.1.1| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Horn not working |1.6.2a| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake pipe inadequately supported |3.6.B.1| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Missing |6.2.1h| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside An item not tested |Manual| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Registration plate lamp issues | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
All direction indicators adversely affected by the operation of another lamp all four indicators coming on together (4.4.3 (b)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Suspension component mounting has an unsafe modification suspension modification reduces ground clearance causing exhaust to hit road surface (5.3.3 (c) (i)) | 1 |
Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |