Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Horn not working |1.7.3a| | 9 |
Registration plate issues | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Brake hose excessively deteriorated | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake pipe inadequately supported |3.2.B2b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Rear suspension component loose |2.4.A.1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Horn control defective |1.7.2a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Direction indicators flashing less than 60 times a minute all four corners |1.5.1c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Offside Motorcycle structure cracked |6.1.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Upper Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies blowing fuse when applied |1.3.1a| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Outer Front Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Centre Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp missing |1.1.1a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front wheel spindle securing nut|s| loose |9.2.8a| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |