| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 23 |
| Registration plate issues | 13 |
| Horn not working |1.7.3a| | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Throttle operating incorrectly |6.2.1f| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Brake disc|s| cracked |3.2.A1g| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Front shock absorber seal failed and leaking oil o/s and n/s |2.3.3| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Offside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front All direction indicators missing |4.4.1 |a| |ii|| | 1 |
| Footrest missing rear foot rest |6.2.12 |a|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Pillion seat with a defective supporting structure no grab rail |6.2.6 |a| |i|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front suspension has severe distortion of a load bearing member or its supporting structure. |2.3.8| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Inner Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Centre Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Brake cylinder severely corroded |3.2.B1b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Centre Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Brake component is excessively corroded |3.1.5| | 1 |
| Fuel tank insecure |6.1.3 |a| |i|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Offside Rear Upper Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced REAR FRAME SEVERELY CORRODED AND SHOCK ABSORBER MOUNTING INSECURE |6.1.1 |b| |ii|| | 1 |
| Offside Front Outer Exhaust is leaking and excessively noisey Downpipe At Manifold/Flange |7.1.1b| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Offside Rear Brake component is fractured drum plate |3.1.5| | 1 |
| Front Outer Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |