| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 35 |
| Registration plate issues | 24 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 17 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
| Horn not working |1.7.3a| | 15 |
| Headlamp aim out of alignment | 15 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Throttle operating incorrectly |6.2.1f| | 9 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
| Drive chain excessively loose |6.2.1d| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Fuel system component leaking |7.2.1a| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Offside Handlebar deformed |2.1.1b| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Fuel tank leaking |7.2.1a| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Brake hose excessively deteriorated | 3 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Offside Front Direction indicators not working |1.5.1c| | 3 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front An item not tested |Manual| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 2 |
| Rear Brake pedal is inoperative |3.1.3c| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Exhaust has part of the system missing |7.1.1a| | 2 |
| Offside Front Upper Throttle operating incorrectly |6.2.1f| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Nearside Front Lower Brake pipe union leaking fluid |3.2.B4| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Centre Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Central Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Upper Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Front Upper Handlebar deformed |2.1.1b| | 1 |
| Nearside Front Upper Handlebar deformed |2.1.1b| | 1 |
| Nearside Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Nearside Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
| Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Offside Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Registration plate lamp issues | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Front Brake component is excessively corroded |3.1.5| | 1 |
| Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Offside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake component is fractured |3.1.5| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Nearside Footrest missing |6.2.1a| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
| Front Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Front Fuel system component leaking |7.2.1a| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Rear An item not tested |Manual| | 1 |
| Brake performance not tested |3.3| | 1 |
| Nearside Front suspension assembly component missing |2.3.1| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Nearside Front Headlamp switch faulty |1.2.4| | 1 |
| Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Throttle operating incorrectly throttle sticking on when full locked to the right |6.2.7 |a| |i|| | 1 |
| Rear Brake hose damaged and likely to fail brake reservoir pipe is frayed and torn excessively |1.1.12 |a|| | 1 |
| Nearside Front Inner Motorcycle structure joining/attachment plate or fastening insecure plate welded to the frame to secure petrol tank at the front is cracked |6.1.1 |b| |i|| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension exhaust. |2.4.A.3a| | 1 |
| Drive chain fouling another component chainguard bolt. |6.2.1d| | 1 |
| Rear Motorcycle structure is fractured and structural rigidity is significantly reduced brake caliper torque arm cracked |6.1.1 |a| |i|| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak front fork seal (5.3.2 (b)) | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Nearside Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
| Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Offside Front Throttle operating incorrectly throttle sticking on (6.2.7 (a) (i)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Offside Front Upper Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Offside Front Handlebar excessively deformed hand trap (2.2.1 (c) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |