| Most common failures | No# failures |
|---|
| Registration plate issues | 7 |
| Headlamp aim out of alignment | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 2 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Headlamp aim not tested |1.6| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake disc insecure |1.1.14 |a| |ii|| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Brake pipe excessively corroded | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Brake hose excessively stretched |1.1.12 |b| |ii|| | 1 |
| Offside Front Brake hose excessively stretched |1.1.12 |b| |ii|| | 1 |
| Rear Wheel spindle loose |5.2.1 |c| |i|| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Handlebar handgrip missing |2.1.1c| | 1 |
| Offside Handlebar handgrip missing |2.1.1c| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Position lamp missing (4.2.1 (a)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls No Operation on Rear Brake Pedal (4.3.2 (a) (iii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |