| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Registration plate issues | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Horn not working |1.7.3a| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Nearside Front Footrest insecure |6.2.1a| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front Handlebar deformed |2.1.1b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Registration plate lamp issues | 2 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 2 |
| Nearside Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected rough |2.2.2 |f| |ii|| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Centre Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Stop lamp not working front lever |4.3.1 |a| |ii|| | 1 |
| Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Offside Front Footrest insecure Bolt missing from footrests and brake pedal hanger |6.2.1a| | 1 |
| Nearside Headlamp insecure |1.2.3b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Offside Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies off front brake |1.3.1a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Front Stop lamp missing switch. |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Indicator tell tale not functioning |1.5.2| | 1 |
| Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Horn control defective |1.7.2a| | 1 |
| Offside Front Horn control defective |1.7.2a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Stop lamp does not illuminate immediately a brake applies bad connection on front brake light switch, just ok at time of test |1.3.1a| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Stop lamp not working foot pedal (4.3.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen no pattern (4.1.2 (a)) | 1 |
| Nearside Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |