Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Registration plate issues | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Horn not working |1.7.3a| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Drive belt excessively loose. |6.2.1d| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Throttle operating incorrectly |6.2.1f| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake component insecure |1.1.21 |c|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Offside Rear wheel spindle securing nut locking device missing split pin |2.4.A.2b| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies switch faulty |1.3.1a| | 1 |
Offside Front Brake hose excessively twisted |3.2.B3a| | 1 |
Headlamp insecure Head Lamp bracket broken. |4.1.1 |c|| | 1 |
Throttle operating incorrectly Not returning to closedposition (6.2.7 (a) (i)) | 1 |
Exhaust has a major leak of exhaust gases Blowing and insecure (6.1.2 (a)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Brake cable excessively corroded |3.2.A1b| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Central Riders seat insecure seat lock not working ---- new cable fitted |6.2.1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Direction indicator not working replaced both indicators (4.4.1 (a) (ii)) | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust system insecure Bolts missing out of the head |6.1.2 |a|| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Vehicle identification number not legible |0.2 |b|| | 1 |
Shock absorber has a serious fluid leak BOTH |5.3.2 |b|| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
An item not tested |Manual| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Horn not working (7.7 (a)) | 1 |