Most common failures | No# failures |
---|
Headlamp aim out of alignment | 37 |
Registration plate issues | 28 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Front Front wheel bearings are excessively rough |2.3.5b| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Horn not working |1.7.3a| | 3 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Brake hose damaged | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Drive belt excessively tight |6.2.1d| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Centre Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Offside Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Footrest insecure |6.2.12 |a|| | 1 |
Offside Footrest insecure |6.2.12 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Brake lever insecure |1.1.2 |e| |i|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Brake locking device missing rear steady bar |3.2.A1e| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies when rear brake applied |1.3.1a| | 1 |
Brake locking device missing rear drum stay bar nut split pin missing and nut loose |3.2.A1e| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Horn control defective |1.7.2a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake component inadequately mounted torque arm,split pin missing. (1.1.21 (c)) | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Motorcycle structure adversely modified exhaust cut off at a sharp angle |6.1.1b| | 1 |
Front Motorcycle structure adversely modified sharpened studs on front fender |6.1.1b| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Stop lamp not working control 1 (4.3.1 (a) (ii)) | 1 |
Drive belt worn to excess (6.1.7 (c) (i)) | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Riders seat insecure |6.2.1a| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Throttle operating incorrectly Throttle sticking open |6.2.1f| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear shock absorber has inadequate damping effect. N/S & O/S |2.4.A.3b| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies faulty switch |1.3.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working brake operation |4.3.1 |a| |ii|| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Rear Lower Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front Brake hose excessively stretched |1.1.12 |b| |ii|| | 1 |
Rear Exhaust system insecure |6.1.2 |a|| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |