Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Horn not working |1.7.3a| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Rear Footrest missing |6.2.1a| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Registration plate issues | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Brake hose damaged | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Headlamp switch faulty |1.2.4| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Offside Motorcycle structure adversely modified |6.1.1b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Brake hose excessively deteriorated | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Lower Rear suspension component loose |2.4.A.1a| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Fuel system component insecure |7.2.1b| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Centre Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Offside Rear Brake rod insecure split pin missing |1.1.15 |c|| | 1 |
Front Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected spindle nut split pin missing |5.2.1 |c| |ii|| | 1 |
Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected spindle nut split pin missing |5.2.1 |c| |ii|| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear All position lamps not working |4.2.1 |a|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear Wheel fixing missing |single fixing| split pin missing rear wheel |5.2.1 |a| |ii|| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Centre Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Exhaust silencer insecure rear mounting point (8.1.1 (b) (i)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |