>

MOT History from tests of petrol JONWAY JONWAYs year 2008

Review the list of common JONWAY JONWAY failures below or to perform a specific mot history check on your JONWAY then use our popular KnowYourCar service

mot history
Pass percent:65.17%
(The average a petrol JONWAY JONWAY year 2008 passes without issue)
Based on:89 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment6
Rear Brake lever has inadequate reserve travel |3.1.3b|3
Horn not working |1.7.3a|3
Rear reflector on motorcycle missing |1.4.1|3
Front Brake disc|s| insecure |3.2.A1g|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Rear Front mudguard insecure |2.3.7|2
Direction indicators not working |1.5.1c|2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Exhaust is leaking and excessively noisey |7.1.1b|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Throttle operating incorrectly |6.2.1f|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Steering headbearing has excessive free play |2.2.2|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Steering headbearing has excessive free play |2.2.2|1
Front Steering linkage has excessive free play |2.2.2|1
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Front Front suspension assembly component excessively corroded. |2.3.1|1
Nearside Front Direction indicator not working |1.5.1c|1
Nearside Rear Direction indicator not working |1.5.1c|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear suspension component loose |2.4.A.1a|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Headlamp aim not tested |1.6|1
Headlamp insecure |1.2.3b|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front Stop lamp damaged and function impaired |1.3.3a|1
Front Horn not working |1.7.3a|1
Upper Steering headbearing has excessive free play |2.2.2|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front suspension assembly component excessively corroded. |2.3.1|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Stop lamp emits other than a steady red light |1.3.1b|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Centre Riders seat insecure |6.2.1a|1
Riders seat insecure |6.2.1a|1
Brake hose damaged1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front position lamp incorrect colour |1.1.2a|1
Fuel system component insecure |7.2.1b|1
Fuel cap sealing washer deteriorated |7.2.2c|1
Front Direction indicators not working |1.5.1c|1
Rear Direction indicators not working |1.5.1c|1
Offside Front Direction indicator not working |1.5.1c|1
Direction indicator flashing less than 60 times a minute |1.5.1c|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Central Front Floor brake test indicates a binding brake |3.3.C2c|1
Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Central Rear Stop lamp does not emit a steady light |1.3.1b|1
Front Front suspension assembly component excessively corroded. Fork legs corroded in swept area. |2.3.1|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Fairings insecure and likely to impede the steering |2.1.2e|1
Rear Brake lever attachment screws loose |3.1.2b|1
Rear Brake lever mounting insecure |3.1.2a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy