| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 126 |
| Drive chain excessively loose |6.2.1d| | 84 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 55 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 52 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 52 |
| Registration plate issues | 51 |
| Front wheel bearings have excessive free play |2.3.5b| | 48 |
| Front wheel bearings are excessively rough |2.3.5b| | 43 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 38 |
| Steering headbearing has excessive free play |2.2.2| | 32 |
| Drive chain worn to excess |6.2.1e| | 30 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 30 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 30 |
| Rear reflector on motorcycle missing |1.4.1| | 26 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 25 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 23 |
| Horn not working |1.7.3a| | 22 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 22 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 21 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 20 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 19 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 18 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 17 |
| Drive chain excessively tight |6.2.1d| | 17 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 15 |
| Offside Front Footrest insecure |6.2.1a| | 14 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 13 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 12 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Nearside Front Footrest insecure |6.2.1a| | 10 |
| Riders seat insecure |6.2.1a| | 10 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 10 |
| Throttle operating incorrectly |6.2.1f| | 10 |
| Front suspension has inadequate damping effect. |2.3.6c| | 10 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 9 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 9 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 9 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 8 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 8 |
| Handlebar deformed |2.1.1b| | 8 |
| Rear suspension component loose |2.4.A.1a| | 8 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 8 |
| Headlamp aim beam image kick up to the offside |1.6| | 7 |
| Brake locking device missing |3.2.A1e| | 7 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 7 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
| Offside Rear Direction indicator not working |1.5.1c| | 7 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 7 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 7 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 6 |
| Rear reflector missing (4.8.2 (a) (ii)) | 6 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
| Nearside Front Direction indicator not working |1.5.1c| | 6 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 6 |
| Headlamp insecure |1.2.3b| | 6 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
| Rear Brake locking device missing |3.2.A1e| | 6 |
| Front Steering headbearing has excessive free play |2.2.2| | 6 |
| Nearside Rear Direction indicator not working |1.5.1c| | 6 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Front mudguard insecure |2.3.7| | 6 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 6 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
| Nearside Footrest insecure |6.2.1a| | 5 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 5 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 5 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 5 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Rear Direction indicator insecure |1.5.3b| | 5 |
| Rear Drive chain worn to excess |6.2.1e| | 5 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 5 |
| Headlamp switch faulty |1.2.4| | 5 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 5 |
| Brake hose excessively deteriorated | 5 |
| Front Footrest insecure |6.2.1a| | 5 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
| Direction indicators not working |1.5.1c| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 4 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 4 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 4 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Drive chain excessively loose |6.2.1d| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Offside Footrest insecure |6.2.1a| | 4 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Nearside Direction indicator not working |1.5.1c| | 4 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Rear position lamp insecure |1.1.1c| | 4 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 4 |
| Brake pedal insecure |3.1.2a| | 4 |
| Registration plate lamp issues | 4 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Headlamp aim not tested |1.6| | 4 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Drive chain fouling another component |6.2.1d| | 4 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 4 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 3 |
| Footrest insecure |6.2.1a| | 3 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 3 |
| Front Front mudguard insecure |2.3.7| | 3 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| All direction indicators not working (4.4.1 (a) (ii)) | 3 |
| Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 3 |
| Rear Brake pedal mounting insecure |3.1.2a| | 3 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 3 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
| Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 3 |
| Exhaust has part of the system missing |7.1.1a| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| An item not tested |Manual| | 3 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 3 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
| Fuel system component insecure |7.2.1b| | 3 |
| Brake lever cannot be applied smoothly |3.1.3d| | 3 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 3 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 3 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 3 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |