Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Offside Headlamp not working on main beam |1.7.5a| | 4 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 3 |
Registration plate lamp issues | 3 |
Brake hose has insufficient room to move | 3 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Nearside Rear Exhaust system not adequately supported |7.1.1| | 2 |
Rear parking brake recording little or no effort | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Offside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Brakes imbalanced across an axle | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
All position lamps adversely affected by the operation of another lamp not working when headlights switched on |1.1.A.3f| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Main beam `tell-tale` not working |1.7.4c| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |