| Most common failures | No# failures |
|---|
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Parking brake: efficiency below requirements (3.7.B.7) | 5 |
| Rear parking brake recording little or no effort | 4 |
| Horn not working |1.6.2a| | 3 |
| Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Front front brake binding |3.7.B.1| | 2 |
| Headlamp aim out of alignment | 2 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
| Rear brake binding | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Stop lamp not working (1.2.1b) | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
| Battery insecure |1.9.1| | 1 |
| Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Offside Track rod end ball joint has excessive play inner and outer |2.2.B.1f| | 1 |
| Nearside Track rod end ball joint has excessive play inner and outer |2.2.B.1f| | 1 |
| Offside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
| Fuel tank leaking drain seal |7.2.3| | 1 |
| Nearside Rear brake caliper securing device loose |3.5.1j| | 1 |
| Fuel tank leaking (7.2.3) | 1 |
| Stop lamp not working (1.2.1b) | 1 |
| Offside Headlamp not in good working order adversely affecting beam image (1.2.4a) | 1 |
| Indicator switch faulty (1.4.A.1) | 1 |
| Parking brake lever has no reserve travel (3.1.6b) | 1 |
| Nearside Outer Front Lower Front suspension retaining device missing (2.5.A.4) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Brake valve leaking brake switch |1.1.7 |d| |i|| | 1 |
| Nearside Front Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
| Offside Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside rear brake recording little or no effort (3.7.B.5a) | 1 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front suspension locking device missing |2.5.A.4| | 1 |
| Offside Front suspension locking device missing |2.5.A.4| | 1 |
| Nearside Rear Fluid suspension leaking |2.4.D.2| | 1 |
| Offside Stop lamp not working (1.2.1b) | 1 |
| Nearside Front suspension retaining device missing |2.5.A.4| | 1 |
| Offside Front suspension retaining device missing |2.5.A.4| | 1 |
| Offside Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Front brake caliper leaking |3.6.A.1| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Front Fuel system component leaking |7.2.3| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Offside Rear Fluid suspension leaking |2.4.D.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Upper Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Registration plate lamp issues | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Front Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Track rod end ball joint has excessive play (2.2.B.1f) | 1 |
| Offside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Offside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Exhaust has a major leak of exhaust gases center pipe (7.1.2) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded at front of vehicle chassis (2.4.A.3) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded at front of vehicle chassis (2.4.A.3) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Offside Rear Leaf spring anchor bracket damaged and seriously weakened (2.4.B.6d) | 1 |
| Offside Front Brake actuating linkage mounting prescribed area is severely distorted floor pan (3.3.A.2) | 1 |
| Nearside Rear position lamp(s) not working (1.1.A.3b) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor/inner wing (6.1.1 (c) (i)) | 1 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Outer Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Horn control missing |1.6.1| | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Outer Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |