Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 10 |
Rear brake binding | 7 |
Headlamp aim out of alignment | 4 |
Fuel system component leaking |7.2.3| | 2 |
Rear brake application uneven | 2 |
Fuel pipe leaking |7.2.3| | 2 |
Rear Mechanical brake component has restricted free movement | 2 |
Horn not working |1.6.2a| | 2 |
Brake hose has insufficient room to move | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Nearside Front Lower Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Offside Front Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Offside Rear rear brakes release unevenly |3.7.B.4| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Rear Bootlid cannot be secured in the closed position |6.4.1| | 1 |
Front front brake binding |3.7.B.1| | 1 |
Offside Rear Road wheel fixing missing |5.2.1 |a| |i|| | 1 |
Fuel cap/sealing device ineffective not securing |6.1.3 |b| |i|| | 1 |
Exhaust system insecure centre and rear fixings loose |6.1.2 |a|| | 1 |
Power steering malfunctioning |2.1.5 |a|| | 1 |
Nearside Front Seat belt anchorage loose |7.1.1 |b|| | 1 |
Offside Front Seat belt anchorage loose |7.1.1 |b|| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front suspension locking device missing |2.5.A.4| | 1 |
Offside Front suspension locking device missing |2.5.A.4| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Nearside Rear Wheel insecure |4.2.A.1c| | 1 |
Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
Rear Fuel hose leaking |7.2.3| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Rear parking brake recording little or no effort | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Windscreen has damage | 1 |
Nearside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Brake pipe excessively corroded | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Offside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Leaf spring fractured |2.4.B.1a| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |