| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 2 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Nearside Front Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat mounting (7.1.1 (a) (i)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Outer Position lamp likely to become detached has become detatched (side marker) (4.2.1 (c) (ii)) | 1 |
| Offside Rear Outer Position lamp not working side marker (4.2.1 (a) (ii)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill corrosion within seatbelt anchorage area (7.1.1 (a) (i)) | 1 |
| Windscreen wiper not working (3.4 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step and inner sills (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step and inner sills (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill whole sill is in poor condition (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill whole sill in poor condition (5.3.6 (a) (i)) | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| Exhaust has a major leak of exhaust gases Box not connected (6.1.2 (a)) | 1 |
| Headlamp aim out of alignment | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Emissions not tested (8.2.2.2 (e)) | 1 |
| Nearside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Upper Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Upper Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Brake pipe excessively corroded | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Emissions not tested Due to bad coolant leak (8.2.2.2 (e)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 1 |
| Offside Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Nearside Front Position lamp not working marker (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working marker (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working marker (4.2.1 (a) (ii)) | 1 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |