| Most common failures | No# failures |
|---|
| Brake hose excessively deteriorated | 5 |
| Registration plate lamp issues | 5 |
| Brake pipe excessively corroded | 4 |
| Headlamp aim out of alignment | 3 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Rear brake binding | 1 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Offside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Rear brake application uneven | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
| Brake pedal creeps with the vacuum fully depleted |3.3.C.2| | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Front brake application uneven | 1 |
| Nearside Rear Upper Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Rear Upper Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Offside Front Drag link end ball joint has excessive play onto axle (2.1.3 (b) (i)) | 1 |
| Offside Front Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt axle end (2.1.3 (g) (ii)) | 1 |
| Nearside Exhaust has a major leak of exhaust gases flexi tailpipe holed (6.1.2 (a)) | 1 |
| Nearside Exhaust system insecure tail pipe section insecurely mounted (6.1.2 (a)) | 1 |
| Nearside Rear Upper Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Side repeater not working |4.4.1 |a| |ii|| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Anti-roll bar linkage worn and seriously weakened both rear bushs |2.4.G.1| | 1 |
| Offside Front Front position lamp|s| not working side marker |1.1.A.3b| | 1 |
| Nearside Rear Front position lamp|s| not working side marker |1.1.A.3b| | 1 |
| Exhaust system not adequately supported tail pipe unable to check emmisions |7.1.1| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Nearside Front Side repeater not working |4.4.1 |a| |ii|| | 1 |