MOT History from tests of diesel IVECO 2800s year 2003

Review the list of common IVECO 2800 failures below or to perform a specific mot history check on your IVECO then use our popular KnowYourCar service

mot history

Pass percent:56.25%

(The average a diesel IVECO 2800 year 2003 passes without issue)

Based on:16 MOT Tests

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	4
Headlamp aim out of alignment	3
Rear parking brake recording little or no effort	3
Brake pipe excessively corroded	3
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Windscreen wiper does not clear the windscreen effectively	2
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Upper Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Body has a sharp edge caused by damage \|6.1.C.1\|	1
Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Registration plate issues	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Exhaust tailpipe not capable of allowing the emission probe to be inserted \|7.4.B.1\|	1
Nearside Front Lower Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Nearside Rear Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Registration plate lamp issues	1
Nearside Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Fuel cap/sealing device mounting flange/sealing method defective \|7.2.4c\|	1
Offside Front Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Nearside Body has a sharp edge caused by damage \|6.1.C.1\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Lower Sub-frame attachment bracket/mounting insecure \|2.4.G.1\|	1
Nearside Front Brake hose twisted \|3.6.B.4c\|	1
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Nearside Front Ball joint has excessive play \|2.2.B.1f\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Side repeater not working \|1.4.A.2c\|	1
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush \|2.4.B.2\|	1
Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush \|2.4.B.2\|	1
Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	4
Headlamp aim out of alignment	3
Rear parking brake recording little or no effort	3
Brake pipe excessively corroded	3
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Windscreen wiper does not clear the windscreen effectively	2
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Upper Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Body has a sharp edge caused by damage \|6.1.C.1\|	1
Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Registration plate issues	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Exhaust tailpipe not capable of allowing the emission probe to be inserted \|7.4.B.1\|	1
Nearside Front Lower Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Nearside Rear Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Registration plate lamp issues	1
Nearside Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Fuel cap/sealing device mounting flange/sealing method defective \|7.2.4c\|	1
Offside Front Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Nearside Body has a sharp edge caused by damage \|6.1.C.1\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Lower Sub-frame attachment bracket/mounting insecure \|2.4.G.1\|	1
Nearside Front Brake hose twisted \|3.6.B.4c\|	1
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Nearside Front Ball joint has excessive play \|2.2.B.1f\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Side repeater not working \|1.4.A.2c\|	1
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush \|2.4.B.2\|	1
Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush \|2.4.B.2\|	1
Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1

MOT History from tests of diesel IVECO 2800s year 2003

Find us on Facebook