Most common failures | No# failures |
---|
Brakes imbalanced across an axle | 2 |
Hazard warning lamps inoperative |1.4.B.1b| | 2 |
Offside Rear Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
Brake pipe excessively corroded | 2 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside brake caliper has restricted free movement |3.5.1k| | 1 |
Nearside Front Fuel hose leaking |7.2.3| | 1 |
Centre Steering column retaining device insecure |2.1.6| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt forward arm |2.1.3 |g| |ii|| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Central Front Seat belt buckle missing |7.1.2 |d|| | 1 |
Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative boot perished and split. |1.1.17 |c| |ii|| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near front cab mount |6.1.B.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded rear of cab floor |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded rear of cab floor |5.2.6| | 1 |
Air/vacuum reservoir mountings/securing straps excessively corroded Air tank strap broken |3.6.D.1a| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Front Drag link end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Rear Drag link end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings welding inadequte |6.1.B.2| | 1 |
Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings welding inadequate |6.1.B.2| | 1 |
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |