Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 15 |
Headlamp aim out of alignment | 13 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Riders seat insecure |6.2.1a| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Horn not working |1.7.3a| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Registration plate issues | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Steering linkage has excessive free play |2.2.2| | 3 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
An item not tested |Manual| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Indicator switch defective |1.5.4| | 2 |
Nearside Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Brake lever insecure |3.1.2a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Brake performance not tested |3.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Front suspension assembly component cracked |2.3.1| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Registration plate lamp issues | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Front position lamp obscured more than 50% |1.1.1d| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Nearside Brake lever mounting insecure |3.1.2a| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Steering linkage has excessive free play |2.2.2| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Brake lever pivots excessively worn |3.1.3a| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
Offside Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Outer Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Upper Indicator tell tale not functioning |1.5.2| | 1 |
Centre Rear Lower Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Brake cable excessively corroded |3.2.A1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
All position lamps do not illuminate immediately when switched on not working due to refusal of engine to start.
Engine subsequently started with a temporary external fuel supply to establish that the lights are in working order |1.1.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |