MOT History from tests of petrol ITALJET D180LCs year 2003

Review the list of common ITALJET D180LC failures below or to perform a specific mot history check on your ITALJET then use our popular KnowYourCar service

mot history

Pass percent:87.96%

(The average a petrol ITALJET D180LC year 2003 passes without issue)

Based on:191 MOT Tests

Most common failures	No# failures
Registration plate issues	5
Headlamp aim out of alignment	5
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Headlamp aim not tested \|1.6\|	2
Headlamp insecure \|1.2.3b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	1
Stop lamp damaged and function impaired \|1.3.3a\|	1
Rear wheel has a missing wheel bolt\|s\| \|4.2.3a\|	1
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Rear position lamp missing \|1.1.1a\|	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Headlamp dipped beam flickers when tapped lightly by hand \|1.2.2c\|	1
Offside Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Front Hydraulic brake control feels spongy \|3.1.4a\|	1
Rear Hydraulic brake control feels spongy \|3.1.4a\|	1
Front Front suspension has inadequate damping effect. \|2.3.6c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Fuel system component insecure \|7.2.1b\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Horn not working \|1.7.3a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Central Front Handlebar mounting clamp loose HANDLEBARS LOOSE ON FORK STEM \|2.1.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	5
Headlamp aim out of alignment	5
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Headlamp aim not tested \|1.6\|	2
Headlamp insecure \|1.2.3b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	1
Stop lamp damaged and function impaired \|1.3.3a\|	1
Rear wheel has a missing wheel bolt\|s\| \|4.2.3a\|	1
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Rear position lamp missing \|1.1.1a\|	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Headlamp dipped beam flickers when tapped lightly by hand \|1.2.2c\|	1
Offside Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Front Hydraulic brake control feels spongy \|3.1.4a\|	1
Rear Hydraulic brake control feels spongy \|3.1.4a\|	1
Front Front suspension has inadequate damping effect. \|2.3.6c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Fuel system component insecure \|7.2.1b\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Horn not working \|1.7.3a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Central Front Handlebar mounting clamp loose HANDLEBARS LOOSE ON FORK STEM \|2.1.1a\|	1

MOT History from tests of petrol ITALJET D180LCs year 2003

Find us on Facebook