Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Registration plate issues | 28 |
Rear reflector on motorcycle missing |1.4.1| | 13 |
Front suspension has inadequate damping effect. |2.3.6c| | 12 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear wheel rotation likely to be impeded |6.2.1b| | 4 |
Horn not working |1.7.3a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Horn not working (7.7 (a) (ii)) | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Registration plate lamp issues | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Steering linkage has excessive free play |2.2.2| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Seat insecure |6.2.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Seat insecure (6.2.1a) | 1 |
Rear Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Offside Rear Direction indicator obscured |1.5.1a| | 1 |
Rear Brake lever is inoperative |3.1.3c| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
An item not tested |Manual| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Headlamp switch insecure |1.2.4| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Centre Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Horn control defective |1.7.2a| | 1 |
Lower Steering linkage has excessive free play |2.2.2| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
Lower Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Motorcycle structure cracked |6.1.1a| | 1 |
Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake performance not tested |3.3| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak Front Fork Seals Leaking (5.3.2 (b)) | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicator affected by the operation of another lamp all |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Inner Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Rear position lamp adversely affected by the operation of another lamp Rear indicator flashing in rear light |1.1.3b| | 1 |
Centre Rear Stop lamp affected by the operation of another lamp Indicator affecting brake light in rear light |1.3.2| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake lever has inadequate reserve travel Front brake lever touches handle bar twist grip when applied |3.1.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
Centre Front Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Upper Steering linkage has excessive free play |2.2.2| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Vehicle identification number not legible |6.3.5a| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Direction indicator flashing less than 60 times a minute all |1.5.1c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |