Most common failures | No# failures |
---|
Registration plate issues | 13 |
Headlamp aim out of alignment | 9 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Fuel hose leaking |7.2.1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear wheel has a missing wheel bolt|s| |4.2.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Fuel system component leaking |7.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Brake hose damaged | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Steering linkage has excessive free play |2.2.2| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
An item not tested |Manual| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Indicator switch defective not cancelling |1.5.4| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Nearside Front Lower Front suspension assembly component loose cv boot insecure |2.3.1| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |