Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 42 |
Brake pipe excessively corroded | 40 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 36 |
Headlamp aim out of alignment | 35 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 29 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 28 |
Registration plate lamp issues | 23 |
Parking brake: efficiency below requirements |3.7.B.7| | 21 |
Registration plate issues | 17 |
Brakes imbalanced across an axle | 17 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 15 |
Nearside Stop lamp not working |1.2.1b| | 14 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 13 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 12 |
Parking brake lever has no reserve travel |3.1.6b| | 12 |
Exhaust has a major leak of exhaust gases |7.1.2| | 11 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
Rear parking brake recording little or no effort | 10 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
Offside Rear fog lamp not working |1.3.2b| | 10 |
Rear brake binding | 9 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 9 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Offside Rear Stop lamp not working |1.2.1b| | 7 |
Offside Stop lamp not working |1.2.1b| | 7 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 7 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 7 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 6 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 6 |
Offside Front position lamp|s| not working |1.1.A.3b| | 6 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 6 |
Nearside Rear Stop lamp not working |1.2.1b| | 5 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 5 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 5 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 5 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Offside front brake binding |3.7.B.1| | 5 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 5 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 5 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 4 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Rear fog lamp not working |1.3.2b| | 4 |
Rear brake application uneven | 4 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
Emissions not tested |7.0| | 4 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 4 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Windscreen wiper blade insecure | 4 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 4 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
Front brake application uneven | 4 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 4 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
Offside Rear Rear fog lamp not working |1.3.2b| | 4 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 4 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Direction indicator not working |1.4.A.2c| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Hazard warning switch faulty |1.4.B.1d| | 3 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Rear wheel bearing has excessive play |2.6.2| | 3 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 3 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front front brake binding |3.7.B.1| | 3 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Offside Rear Braking system leaking |3.6.A.1| | 2 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
rear brakes release unevenly |3.7.B.4| | 2 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 2 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Rear position lamp|s| incomplete |1.1.4a| | 2 |
Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 2 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 2 |
Steering column movement between the shaft and steering wheel |2.1.2b| | 2 |
Nearside Rear Fuel system component insecure |7.2.1| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Mechanical brake component has restricted free movement | 2 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Centre Stop lamp not working |1.2.1b| | 2 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Shock absorber has negligible damping effect |2.7.5| | 2 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Horn not working |1.6.2a| | 2 |
Battery insecure |1.9.1| | 2 |
Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |