Most common failures | No# failures |
---|
Rear brake binding | 4 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brakes imbalanced across an axle | 2 |
Headlamp aim out of alignment | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Horn not working |1.6.2a| | 2 |
Brake pipe excessively corroded | 2 |
Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 2 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Inner Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Steering component mounting prescribed area is excessively corroded offside front chassis (2.1.2 (e) (i)) | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner sill (5.3.6 (a) (i)) | 1 |
Suspension component mounting prescribed area excessively damaged significantly reducing structural strength nearside rear outer sill (5.3.6 (a) (i)) | 1 |
Suspension component mounting prescribed area excessively damaged significantly reducing structural strength nearside rear inner wheel arch (5.3.6 (a) (i)) | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner wheel arch in two places (5.3.6 (a) (i)) | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear outer sill (5.3.6 (a) (i)) | 1 |
Seat belt anchorage prescribed area strength or continuity significantly reduced offside outer sill (7.1.1 (a) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear brake application uneven | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body has a projection caused by damage |6.1.C.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Offside Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Registration plate issues | 1 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Rear Leaf spring splayed and action impaired |2.4.B.1c| | 1 |
Offside Rear Leaf spring splayed and action impaired |2.4.B.1c| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded chassis (2.1.2 (e) (i)) | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and inner arch |2.4.A.3| | 1 |
Centre Obligatory mirror missing |8.1.1| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Brake master cylinder fluid level below minimum level |3.6.G.1e| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Direction indicator incomplete |1.5.A1b| | 1 |
Nearside Front brake caliper has restricted free movement |3.5.1k| | 1 |