MOT History from tests of petrol HYOSUNG RX125s year 2012

Review the list of common HYOSUNG RX125 failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history

Pass percent:50.00%

(The average a petrol HYOSUNG RX125 year 2012 passes without issue)

Based on:10 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	2
Rear Brake pedal attachment screws missing. \|3.1.2b\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Nearside Front Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking battery insecure \|6.1.1c\|	1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking side stand insecure \|6.1.1c\|	1
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Brake locking device missing split pin missing reaction bracket \|3.2.A1e\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Registration plate issues	1
Fuel cap mounting flange/sealing method defective pipe missing \|7.2.2c\|	1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Wheel spoke excessively loose \|4.2.1b\|	1
Drive chain excessively loose \|6.2.1d\|	1
Drive chain worn to excess \|6.2.1e\|	1
Drive chain sprocket worn to excess both \|6.2.1e\|	1
Rear Brake locking device missing \|3.2.A1e\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Brake pedal is positioned so that the brake cannot be readily applied missing \|3.1.3c\|	1
Horn not working (7.7 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	2
Rear Brake pedal attachment screws missing. \|3.1.2b\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Nearside Front Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking battery insecure \|6.1.1c\|	1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking side stand insecure \|6.1.1c\|	1
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Brake locking device missing split pin missing reaction bracket \|3.2.A1e\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Registration plate issues	1
Fuel cap mounting flange/sealing method defective pipe missing \|7.2.2c\|	1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Wheel spoke excessively loose \|4.2.1b\|	1
Drive chain excessively loose \|6.2.1d\|	1
Drive chain worn to excess \|6.2.1e\|	1
Drive chain sprocket worn to excess both \|6.2.1e\|	1
Rear Brake locking device missing \|3.2.A1e\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Brake pedal is positioned so that the brake cannot be readily applied missing \|3.1.3c\|	1
Horn not working (7.7 (a) (ii))	1

MOT History from tests of petrol HYOSUNG RX125s year 2012

Find us on Facebook