>

MOT History from tests of petrol HYOSUNG GV125s year 2009

Review the list of common HYOSUNG GV125 failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history
Pass percent:65.55%
(The average a petrol HYOSUNG GV125 year 2009 passes without issue)
Based on:209 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment13
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|12
Drive chain excessively loose |6.2.1d|11
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Front Roller brake test indicates a binding brake |3.3.A1a|3
Rear Drive chain sprocket worn to excess |6.2.1e|3
Drive chain worn to excess |6.2.1e|3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Rear Drive chain sprocket carrier worn to excess |6.2.1e|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Rear reflector on motorcycle missing |1.4.1|2
Rear Brake pedal has inadequate reserve travel |3.1.3b|2
Throttle operating incorrectly |6.2.1f|2
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Brake disc|s| has excessive run out |3.2.A1m|1
Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Drive chain excessively tight |6.2.1d|1
Direction indicator not working |1.5.1c|1
Offside Front Front position lamp incorrect colour |1.1.2a|1
Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Offside Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Stop lamp emits other than a steady red light |1.3.1b|1
Front Stop lamp does not illuminate immediately a brake applies pos /faulty brake switch |1.3.1a|1
Offside Headlamp switch faulty |1.2.4|1
Nearside Drive chain worn to excess |6.2.1e|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Horn missing |1.7.1|1
Front position lamp incorrect colour |1.1.2a|1
Front wheel bearings have excessive free play |2.3.5b|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Stop lamp not working when rear brake is applied (4.3.1 (a) (ii))1
Rear Valve stem seriously damaged |5.2.3 |j||1
Nearside Rear Footrest missing |6.2.1a|1
Horn not working |7.7 |a| |ii||1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Central Front Handlebar excessively deformed |2.2.1 |c| |i||1
Central Front Horn not working |7.7 |a| |ii||1
Offside Rear Direction indicator not working |4.4.1 |a| |ii||1
Central Rear Stop lamp not working indicator not working on right hand rear |4.3.1 |a| |ii||1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Headlamp switch faulty |1.2.4|1
Brake pedal is inoperative |3.1.3c|1
Indicator switch defective |1.5.4|1
Front Brake lever pivots excessively worn |3.1.3a|1
Offside Exhaust is leaking and excessively noisey |7.1.1b|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Front Fairings insecure and likely to impede the steering |2.1.2e|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Nearside Indicator switch insecure |1.5.4|1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Rear position lamp damaged and function impaired |1.1.1b|1
Rear reflector on motorcycle obscured |1.4.1|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Nearside Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii||1
Offside Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii||1
Rear Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i||1
Drive chain excessively loose |6.1.7 |c| |i||1
Drive chain worn to excess |6.1.7 |c| |i||1
Central Front Steering headbearing excessively stiff or notchy strip and grease |2.2.2 |f| |i||1
Front Direction indicator not working |1.5.1c|1
Centre Front Floor brake test indicates a binding brake |3.3.C2c|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Drive chain worn to excess |6.2.1e|1
Front Brake disc|s| excessively scored |3.2.A1l|1
Front Footrest insecure n/s drivers footpeg broken |6.2.1a|1
Drive chain sprocket carrier worn to excess sprocket carrier bearing |6.2.1e|1
Registration plate issues1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Footrest insecure |6.2.1a|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front Front wheel spindle loose Bearings worn, liable to collapse |2.3.3a|1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Registration plate lamp issues1
Drive chain worn to excess (6.1.7 (c) (i))1
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Front Stop lamp remains on when the brake is released control |1.3.1e|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Horn not working (7.7 (a) (ii))1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Footrest missing |6.2.1a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy