| Most common failures | No# failures |
|---|
| Horn not working |1.7.3a| | 7 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Registration plate issues | 4 |
| Headlamp aim out of alignment | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Headlamp aim not tested |1.6| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Direction indicator missing Both front |4.4.1 |a| |ii|| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Chain guard insecure (6.1.7 (i)) | 1 |
| Riders seat insecure not fitted in front catch (6.2.5 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Drive chain worn to excess and excessively loose |6.2.1e| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Offside Front Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Offside Handlebar restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
| Registration plate lamp issues | 1 |
| Nearside Front All direction indicators incorrect colour (4.4.3 (a)) | 1 |
| Stop lamp not working frt brk (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |