MOT History from tests of petrol HYOSUNG GTs year 2007

Review the list of common HYOSUNG GT failures below or to perform a specific mot history check on your HYOSUNG then use our popular KnowYourCar service

mot history

Pass percent:61.82%

(The average a petrol HYOSUNG GT year 2007 passes without issue)

Based on:1,066 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	55
Drive chain excessively loose \|6.2.1d\|	39
Registration plate issues	32
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	25
Rear reflector on motorcycle missing \|1.4.1\|	23
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	21
Horn not working \|1.7.3a\|	19
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	17
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	17
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	16
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Rear wheel bearings have excessive free play \|2.4.A.2c\|	13
Front Roller brake test indicates a binding brake \|3.3.A1a\|	12
Drive chain worn to excess \|6.2.1e\|	11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	11
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	10
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	10
Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear reflector missing (4.8.2 (a) (ii))	8
Nearside Rear Footrest missing \|6.2.1a\|	7
Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Registration plate lamp issues	7
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	6
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	6
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	6
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Nearside Front Direction indicators not working \|1.5.1c\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	5
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	5
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	5
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	5
Rear Footrest missing \|6.2.1a\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Drive chain excessively tight \|6.2.1d\|	4
Front Brake excessively binding (1.2.1 (f))	4
Rear Brake excessively binding (1.2.1 (f))	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Headlamp switch insecure \|1.2.4\|	4
Rear Drive chain excessively loose \|6.2.1d\|	4
Nearside Rear Direction indicator not working \|1.5.1c\|	4
Rear Shock absorber has negligible damping effect (5.3.2 (b))	4
Rear Drive chain sprocket worn to excess \|6.2.1e\|	4
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	3
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	3
Rear Brake disc fractured (1.1.14 (a) (ii))	3
Rear Drive chain excessively loose (6.2.1d)	3
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	3
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	3
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	3
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front Horn not working \|1.7.3a\|	3
Stop lamp affected by the operation of another lamp \|1.3.2\|	3
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Offside Front Footrest insecure \|6.2.1a\|	3
Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	3
Headlamp insecure \|1.2.3b\|	3
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Rear Brake disc\|s\| cracked \|3.2.A1g\|	3
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Rear Stop lamp not working (4.3.1 (a) (ii))	3
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))	3
Nearside Front Direction indicator missing \|1.5.1a\|	3
Offside Front Direction indicator missing \|1.5.1a\|	3
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Throttle operating incorrectly \|6.2.1f\|	3
Headlamp switch faulty \|1.2.4\|	3
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))	3
Direction indicator flashing more than 120 times per minute \|1.5.1c\|	3
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	3
Horn not working (7.7 (a))	3
Steering headbearing has excessive free play \|2.2.2\|	3
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Stop lamp remains on when the brakes are released	2
Front Stop lamp not working (4.3.1 (a) (ii))	2
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))	2
Direction indicators not working \|1.5.1c\|	2
Offside Front Direction indicator not working (4.4.1 (a) (ii))	2
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear Brake fluid reservoir insecurely mounted \|3.2.B1a\|	2
Rear wheel bearings are excessively rough \|2.4.A.2c\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear wheel bearings have excessive free play (2.4.A.2c)	2
Front Front wheel bearings are excessively rough (2.3.5b)	2
Brake hose excessively deteriorated	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	2
Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	2
Throttle operating incorrectly (6.2.7 (a) (i))	2
Fairings so located that it is likely to impede the steering \|2.1.2e\|	2
Brake hose damaged	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Drive chain sprocket worn to excess \|6.2.1e\|	2
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear Brake caliper insecure (1.1.16 (c) (i))	2
Rear Valve stem seriously damaged (5.2.3 (j))	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls \|2.1.2b\|	2
Rear Drive chain excessively tight \|6.2.1d\|	2
Nearside Handlebar mounting clamp bolt loose \|2.1.1a\|	2
Fuel tank leaking \|7.2.1a\|	2
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))	2
Nearside Rear Footrest missing (6.2.12 (a))	2
Offside Rear Footrest missing (6.2.12 (a))	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Indicator switch insecure \|1.5.4\|	2
Chain guard insecure \|6.2.1c\|	2
Rear Footrest missing (6.2.12 (a))	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Offside Rear Footrest missing \|6.2.1a\|	2
Rear Position lamp not working (4.2.1 (a))	2
Nearside Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Offside Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Front Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Rear Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition \|8.1.1 \|a\|\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	55
Drive chain excessively loose \|6.2.1d\|	39
Registration plate issues	32
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	25
Rear reflector on motorcycle missing \|1.4.1\|	23
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	21
Horn not working \|1.7.3a\|	19
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	17
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	17
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	16
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Rear wheel bearings have excessive free play \|2.4.A.2c\|	13
Front Roller brake test indicates a binding brake \|3.3.A1a\|	12
Drive chain worn to excess \|6.2.1e\|	11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	11
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	10
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	10
Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear reflector missing (4.8.2 (a) (ii))	8
Nearside Rear Footrest missing \|6.2.1a\|	7
Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Registration plate lamp issues	7
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	6
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	6
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	6
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Nearside Front Direction indicators not working \|1.5.1c\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	5
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	5
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	5
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	5
Rear Footrest missing \|6.2.1a\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Drive chain excessively tight \|6.2.1d\|	4
Front Brake excessively binding (1.2.1 (f))	4
Rear Brake excessively binding (1.2.1 (f))	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Headlamp switch insecure \|1.2.4\|	4
Rear Drive chain excessively loose \|6.2.1d\|	4
Nearside Rear Direction indicator not working \|1.5.1c\|	4
Rear Shock absorber has negligible damping effect (5.3.2 (b))	4
Rear Drive chain sprocket worn to excess \|6.2.1e\|	4
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	3
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	3
Rear Brake disc fractured (1.1.14 (a) (ii))	3
Rear Drive chain excessively loose (6.2.1d)	3
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	3
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	3
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	3
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front Horn not working \|1.7.3a\|	3
Stop lamp affected by the operation of another lamp \|1.3.2\|	3
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Offside Front Footrest insecure \|6.2.1a\|	3
Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	3
Headlamp insecure \|1.2.3b\|	3
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Rear Brake disc\|s\| cracked \|3.2.A1g\|	3
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Rear Stop lamp not working (4.3.1 (a) (ii))	3
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))	3
Nearside Front Direction indicator missing \|1.5.1a\|	3
Offside Front Direction indicator missing \|1.5.1a\|	3
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Throttle operating incorrectly \|6.2.1f\|	3
Headlamp switch faulty \|1.2.4\|	3
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))	3
Direction indicator flashing more than 120 times per minute \|1.5.1c\|	3
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	3
Horn not working (7.7 (a))	3
Steering headbearing has excessive free play \|2.2.2\|	3
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Stop lamp remains on when the brakes are released	2
Front Stop lamp not working (4.3.1 (a) (ii))	2
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))	2
Direction indicators not working \|1.5.1c\|	2
Offside Front Direction indicator not working (4.4.1 (a) (ii))	2
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear Brake fluid reservoir insecurely mounted \|3.2.B1a\|	2
Rear wheel bearings are excessively rough \|2.4.A.2c\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear wheel bearings have excessive free play (2.4.A.2c)	2
Front Front wheel bearings are excessively rough (2.3.5b)	2
Brake hose excessively deteriorated	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	2
Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	2
Throttle operating incorrectly (6.2.7 (a) (i))	2
Fairings so located that it is likely to impede the steering \|2.1.2e\|	2
Brake hose damaged	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Drive chain sprocket worn to excess \|6.2.1e\|	2
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Rear Brake caliper insecure (1.1.16 (c) (i))	2
Rear Valve stem seriously damaged (5.2.3 (j))	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls \|2.1.2b\|	2
Rear Drive chain excessively tight \|6.2.1d\|	2
Nearside Handlebar mounting clamp bolt loose \|2.1.1a\|	2
Fuel tank leaking \|7.2.1a\|	2
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))	2
Nearside Rear Footrest missing (6.2.12 (a))	2
Offside Rear Footrest missing (6.2.12 (a))	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Indicator switch insecure \|1.5.4\|	2
Chain guard insecure \|6.2.1c\|	2
Rear Footrest missing (6.2.12 (a))	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Offside Rear Footrest missing \|6.2.1a\|	2
Rear Position lamp not working (4.2.1 (a))	2
Nearside Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Offside Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Front Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Rear Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition \|8.1.1 \|a\|\|	2

MOT History from tests of petrol HYOSUNG GTs year 2007

Find us on Facebook