| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 23 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
| Drive chain excessively loose |6.2.1d| | 16 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Drive chain worn to excess |6.2.1e| | 11 |
| Horn not working |1.7.3a| | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Registration plate issues | 6 |
| Headlamp aim beam image kick up to the offside |1.6| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Position lamp switch insecure |1.1.4b| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Indicator switch insecure |1.5.4| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Offside Front Footrest insecure |6.2.1a| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Registration plate lamp issues | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Brake pedal insecure |3.1.2a| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Front position lamp incorrect colour |1.1.2a| | 2 |
| Offside Front Footrest missing |6.2.1a| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Brake lever pivots excessively worn |3.1.3a| | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Central Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Lower Rear suspension bush has excessive free play shock |2.4.A2a|i|| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake lever mounting insecure Right side switch gear insecure |3.1.2a| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Forks in such a condition that steering control is adversely affected leaking os (2.2.2 (d) (ii)) | 1 |
| Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Central Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Central Rear Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Centre Handlebar deformed |2.1.1b| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Offside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front position lamp does not face the front |1.1.1d| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front Lower Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Rear Footrest missing Both |6.2.1a| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain joining link circlip backwards |6.2.1h| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Offside Front Brake caliper insecure bolt does not tighten up |1.1.16 |c| |i|| | 1 |
| Nearside Front Footrest insecure Footpeg missing locking device |6.2.12 |a|| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Direction indicators flashing more than 120 times per minute Left |1.5.1c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Nearside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Brake lever mounting cracked |3.1.2c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Centre Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Central Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Offside Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| An item not tested |Manual| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| All position lamps not working side light |4.2.1 |a|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake hose damaged | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Drive chain fouling another component |6.2.1d| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
| Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |