>

MOT History from tests of petrol HUSQVARNA TEs year 2005

Review the list of common HUSQVARNA TE failures below or to perform a specific mot history check on your HUSQVARNA then use our popular KnowYourCar service

mot history
Pass percent:70.37%
(The average a petrol HUSQVARNA TE year 2005 passes without issue)
Based on:216 MOT Tests
Most common failuresNo# failures
Rear reflector on motorcycle missing |1.4.1|25
Registration plate issues15
Headlamp aim out of alignment11
Horn not working |1.7.3a|10
Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|8
Front wheel bearings have excessive free play |2.3.5b|8
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Rear wheel bearings have excessive free play |2.4.A.2c|3
Chain guard insecure |6.2.1c|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Headlamp aim beam image kick up to the offside |1.6|2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Central Rear Lower Wheel bearing has excessive play (5.1.3 (a) (i))2
Horn not working (7.7 (a) (ii))1
Registration plate lamp issues1
Nearside Direction indicators not working |1.5.1c|1
Front Upper Steering headbearing has excessive free play |2.2.2|1
Lower Rear suspension bearing has excessive free play |2.4.A2a|i||1
Offside Rear suspension bearing has excessive free play |2.4.A2a|i||1
Nearside Rear suspension bearing has excessive free play |2.4.A2a|i||1
Headlamp missing |1.2.3a|1
Steering headbearing has excessive free play |2.2.2|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Offside Front Direction indicator not working |1.5.1c|1
Direction indicator missing |1.5.1a|1
Indicator switch does not operate the direction indicators on the side selected |1.5.4|1
Indicator tell tale not functioning |1.5.2|1
Horn missing |1.7.1|1
Stop lamp does not illuminate immediately a brake applies handle bar brake |1.3.1a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Riders seat insecure |6.2.1a|1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Nearside All direction indicators not working Front and rear |4.4.1 |a| |ii||1
Rear reflector missing |4.8.2 |a| |ii||1
Rear Brake fluid reservoir fluid level significantly below minimum level rear res below low mark (1.1.10 (d) (ii))1
Rear Brake disc significantly and obviously worn Disc worn on mountings to wheel |1.1.14 |a| |i||1
Brake excessively binding (1.2.1 (f))1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Wheel spoke excessively loose |4.2.1b|1
Front Stop lamp missing |1.3.3a|1
Headlamp aim not tested |1.6|1
Horn not working (7.7 (a))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Fuel cap ineffective (6.1.3 (b) (i))1
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Front Wheel has an excessively eccentric bead rim. |4.2.2|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Horn not working |7.7 |a| |ii||1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear reflector missing (4.8.2 (a) (ii))1
Central Rear Upper Position lamp not working (4.2.1 (a))1
Central Rear Upper Stop lamp not working (4.3.1 (a) (ii))1
Front Front wheel bearings are excessively rough |2.3.5b|1
Front Brake disc insecure |1.1.14 |a| |ii||1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Drive chain worn to excess |6.2.1e|1
Drive chain sprocket worn to excess |6.2.1e|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Drive chain excessively loose |6.2.1d|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Rear Brake disc|s| insecure |3.2.A1g|1
Lower Rear mono-shock insecure securing nut missing |2.4.B.4|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy