| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 6 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Speed limiter plate missing |6.9.1a| | 2 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Steering rack insecure |2.2.B.1a| | 2 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Registration plate lamp issues | 2 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 2 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Speed limiter plate not clearly and indelibly marked with the set speed |6.9.2a| | 1 |
| Nearside Front Suspension has inadequate clearance with the bump stop |2.4.A.1| | 1 |
| Offside Front Suspension has inadequate clearance with the bump stop |2.4.A.1| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Offside Front Side repeater not working |1.4.A.2c| | 1 |
| Offside Rear Leaf spring shackle bracket loose |2.4.B.6a| | 1 |
| Nearside Rear Leaf spring shackle bracket loose |2.4.B.6a| | 1 |
| Registration plate issues | 1 |
| Front Front outline marker lamp|s| not working |1.1.B.1c| | 1 |
| Front All outline marker lamps not working |1.1.B.1c| | 1 |
| Rear Brake pipe excessively chafed |3.6.B.2c| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Front Vehicle structure chassis weld breaking away. |6.1.5| | 1 |
| Rear Fuel system component insecure |7.2.1| | 1 |
| Rear Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Front Power steering pipe|s| or hose|s| leaking |2.3.1b| | 1 |
| Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Rear brake disc cracked |3.5.1g| | 1 |
| Nearside Rear Stop lamp not working |1.3.2a| | 1 |
| Nearside Front Front constant velocity joint outer gaiter split |2.5.C.1a| | 1 |
| Offside rear brake recording little or no effort |3.8.A.4a| | 1 |
| Offside Rear rear brake recording little or no effort |3.8.A.4a| | 1 |
| Speed limiter not fitted |6.9.3| | 1 |
| Rear fog lamp tell tale inoperative |1.1.6e| | 1 |
| Nearside Rear Wheel hub spigot mounting excessively worn |4.2.B.5| | 1 |
| Offside Rear Wheel hub spigot mounting excessively worn |4.2.B.5| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| An item not tested |Manual| | 1 |
| Front position lamp|s| not in good working order |not working| |1.1.4a| | 1 |
| Offside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Front Wheel nut missing |4.2.1f| | 1 |
| Speed limiter plate missing |6.5.A.1a| | 1 |
| Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |