>

MOT History from tests of petrol HONDA XR125Ls year 2007

Review the list of common HONDA XR125L failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:70.38%
(The average a petrol HONDA XR125L year 2007 passes without issue)
Based on:1,050 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment60
Rear reflector on motorcycle missing |1.4.1|27
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||21
Registration plate issues14
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|14
Drive chain excessively loose |6.2.1d|13
Steering movement excessively `notchy` with the wheel raised |2.2.1b|12
Front Roller brake test indicates a binding brake |3.3.A1a|11
Nearside Front shock absorber seal failed and leaking oil |2.3.3|11
Exhaust is leaking and excessively noisey |7.1.1b|11
Registration plate lamp issues11
Offside Front shock absorber seal failed and leaking oil |2.3.3|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Headlamp not working on dipped beam (4.1.1 (a) (ii))9
Wheel alignment incorrect which adversely affects the handling |2.5.1|7
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|7
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|6
Front Floor brake test indicates a binding brake |3.3.C2c|6
Nearside Rear Footrest missing |6.2.1a|6
Rear Roller brake test indicates a binding brake |3.3.A1a|5
Drive chain worn to excess |6.2.1e|5
Rear reflector missing |4.8.2 |a| |ii||5
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|5
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|5
Throttle operating incorrectly |6.2.1f|4
Handlebar deformed |2.1.1b|4
Nearside Rear Direction indicators not working |1.5.1c|4
Offside Rear Direction indicators not working |1.5.1c|4
Headlamp not working on main beam (4.1.1 (a) (ii))4
Rear reflector missing (4.8.2 (a) (ii))4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|3
Rear Drive chain sprocket worn to excess |6.2.1e|3
Rear Stop lamp remains on when the brake is released |1.3.1e|3
Rear Brake pedal has inadequate reserve travel |3.1.3b|3
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear Exhaust is leaking and excessively noisey |7.1.1b|3
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Horn not working |1.7.3a|3
Nearside Rear Direction indicator insecure |1.5.3b|3
Offside Rear Direction indicator not working |1.5.1c|3
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||3
Front Position lamp not working (4.2.1 (a))3
Headlamp aim not tested (4.1.2 (b))3
Rear suspension bush has excessive free play |2.4.A2a|i||2
Front wheel bearings are excessively rough |2.3.5b|2
Steering headbearing has excessive free play |2.2.2|2
Rear suspension bearing has excessive free play |2.4.A2a|i||2
Front Brake excessively binding |1.2.1 |f||2
Offside Rear Direction indicator insecure |1.5.3b|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Front Wheel has an excessively distorted bead rim. |4.2.2|2
Drive chain excessively tight |6.2.1d|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Headlamp aim beam image kick up to the offside |1.6|2
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Stop lamp remains on when the brake is released |1.3.1e|2
Nearside Front Direction indicator not working |1.5.1c|2
Front Stop lamp remains on when the brake is released |1.3.1e|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
All direction indicators not working |4.4.1 |a| |ii||2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Headlamp insecure |1.2.3b|2
Riders seat insecure |6.2.1a|2
Brake pedal has inadequate reserve travel |3.1.3b|2
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|2
Rear An item not tested |Manual|2
Rear reflector on motorcycle obscured |1.4.2b|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Footrest missing |6.2.1a|2
Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Front Brake disc contaminated (1.1.14 (b))2
Nearside Shock absorber has a serious fluid leak (5.3.2 (b))2
Stop lamp remains on when the brakes are released2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Front Brake excessively binding (1.2.1 (f))2
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))2
Horn not working (7.7 (a))2
Offside Rear Direction indicator not working (4.4.1 (a) (ii))2
Offside Brake lever insecure Lever pivot lock nut loose |3.1.2a|1
Front wheel bearings have excessive free play |2.3.5b|1
Front shock absorber seal failed and leaking oil both |2.3.3|1
Rear suspension bearing excessively deteriorated |2.4A.2a|i||1
Brake pedal pivots excessively worn |3.1.3a|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Nearside Front Front suspension has inadequate damping effect. |2.3.6c|1
Offside Front Front suspension has inadequate damping effect. |2.3.6c|1
Front suspension has inadequate damping effect. |2.3.6c|1
Rear Wheel spoke missing |4.2.1b|1
Inner Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Inner Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Offside Front Upper Direction indicator insecure |1.5.3b|1
Rear wheel spindle loose |2.4.A.2b|1
Rear Direction indicator not working |1.5.1c|1
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c|1
Offside Direction indicator flashing more than 120 times per minute |1.5.1c|1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Direction indicator missing all indicators have been removed from machine |1.5.1a|1
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Throttle operating incorrectly excessive revs |6.2.1f|1
Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. swing arm |2.4.A.2d|1
Direction indicators not working |1.5.1c|1
Exhaust excessively deteriorated rusted through r/h/side rear |7.1.1a|1
Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Brake pedal is damaged and the brake cannot be readily applied |3.1.3c|1
Front Front shock absorber seal failed and leaking oil both |2.3.3|1
Nearside Rear suspension bush has excessive free play |2.4.A2a|i||1
Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Drive chain excessively loose |6.1.7 |c| |i||1
Drive chain sprocket worn to excess |6.2.1e|1
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c|1
Rear Footrest missing |6.2.1a|1
Nearside Rear Footrest missing |6.2.12 |a||1
Offside Rear Footrest missing |6.2.12 |a||1
Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Front Throttle operating incorrectly |6.2.1f|1
Front Position lamp not working |4.2.1 |a||1
Nearside Front Direction indicator insecure |1.5.3b|1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Drive chain so worn it is likely to fail |6.1.7 |c| |ii||1
Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii||1
Rear suspension component excessively corroded. swingarm |2.4.A.1a|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Steering headbearing has excessive wear or free play movement notchy |2.2.2 |f| |i||1
Headlamp insecure |4.1.1 |c||1
Rear Brake excessively binding |1.2.1 |f||1
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f||1
Stop lamp not working rear brake lever switch |4.3.1 |a| |ii||1
Rear position lamp deteriorated and function impaired |1.1.1b|1
Rear Stop lamp damaged and function impaired |1.3.3a|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Brake hose excessively deteriorated1
Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Rear Footrest missing |6.2.1a|1
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Front Direction indicators not working |1.5.1c|1
Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Offside Handlebar handgrip missing |2.1.1c|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Horn not working |1.7.3a|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Headlamp deteriorated and function impaired goes on and off when bike moves |1.2.3a|1
Rear Lower Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Stop lamp affected by the operation of the horn |1.3.2|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Offside Shock absorber has a serious fluid leak fork seal leaking . |5.3.2 |b||1
Rear Direction indicator incorrect colour |4.4.3 |a||1
Front Brake lever mounting cracked |3.1.2c|1
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front An item not tested |Manual|1
Upper Fork yoke fractured |2.1.1b|1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Front Brake component damaged and seriously reduced in strength |3.2.A1|1
Rear reflector on motorcycle obscured |1.4.1|1
Headlamp deteriorated and function impaired |1.2.3a|1
Headlamp aim not tested |1.6|1
Front Stop lamp does not illuminate immediately a brake applies None operational from lever |1.3.1a|1
Front shock absorber seal failed and leaking oil Both forks are leaking. |2.3.3|1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Brake lever has restricted free movement |1.1.15 |e||1
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|1
Exhaust excessively deteriorated |7.1.1a|1
Centre Upper All position lamps do not illuminate immediately when switched on |1.1.3a|1
Centre Rear Stop lamp insecure |1.3.3b|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Centre Rear Upper Stop lamp flickers when tapped lightly by hand |1.3.1d|1
Nearside Front Upper Position lamp switch insecure |1.1.4b|1
Nearside Rear Footrest insecure |6.2.1a|1
Rear Rear suspension bearing excessively deteriorated |2.4A.2a|i||1
Front Headlamp insecure |1.2.3b|1
Rear Suspension component corroded and seriously weakened swing arm |5.3.3 |b| |i||1
Stop lamp not working |4.3.1 |a| |ii||1
Rear Exhaust excessively deteriorated |7.1.1a|1
Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Front Brake hose which buldges |3.2.B4|1
Nearside Footrest missing |6.2.1a|1
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii||1
Nearside Rear Direction indicator missing |1.5.1a|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Nearside Drive chain excessively loose |6.2.1d|1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Nearside Rear Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Front Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Offside Front Direction indicator insecure |1.5.3b|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Front Brake pipe inadequately supported |3.2.B2b|1
Fuel cap mounting flange/sealing method defective |7.2.2c|1
Front Fuel cap sealing washer deteriorated |7.2.2c|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Front Fuel system component leaking |7.2.1a|1
Offside Throttle operating incorrectly |6.2.1f|1
Front Brake hose leaking fluid |3.2.B4|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Forks excessively deformed |2.2.2 |d| |i||1
Offside Handlebar grip missing |2.2.1 |d| |i||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Wheel alignment incorrect which adversely affects the steering |2.4 |a||1
Front Brake hose excessively kinked |3.2.B3a|1
Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Exhaust has a major leak of exhaust gases major exhaust leak where the exhaust joins the engine |6.1.2 |a||1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Drive chain worn to excess |6.1.7 |c| |i||1
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Throttle operating incorrectly |6.2.7 |a| |i||1
Front Valve stem seriously misaligned |5.2.3 |j||1
Offside Front Lower Wheel has an excessively distorted bead rim. |4.2.2|1
Offside Front Upper Exhaust is leaking and excessively noisey |7.1.1b|1
Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Direction indicator not working L/H front |1.5.1c|1
Direction indicator not working R/H rear |1.5.1c|1
Nearside Rear suspension bearing has excessive free play |2.4.A2a|i||1
Offside Rear suspension bearing has excessive free play |2.4.A2a|i||1
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Rear Direction indicator not working |1.5.1c|1
Throttle operating incorrectly sticking |6.2.1f|1
Motorcycle structure excessively corroded swingarm |underneath| |6.1.1a|1
Front Stop lamp switch with a delay in operation Not working |4.3.2 |a| |ii||1
Nearside Front Footrest insecure |6.2.1a|1
Rear Direction indicator not working n/s + o/s (4.4.1 (a) (ii))1
Upper Engine mounting/bracket bracket missing (6.1.8 (a) (ii))1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))1
Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))1
Headlamp insecure (4.1.1 (c))1
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1
Drive chain excessively tight (6.2.1d)1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Drive chain worn to excess (6.1.7 (c) (i))1
Nearside Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Drive chain excessively loose (6.1.7 (c) (i))1
Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Indicator switch inoperative (4.4.2 (a) (ii))1
Nearside Rear Footrest missing (6.2.12 (a))1
Offside Rear Footrest missing (6.2.12 (a))1
Offside Throttle control functioning such that safe operation of the motorcycle is adversely affected lock to lock (6.2.7 (a) (ii))1
Front Headlamp not working on main beam (4.1.1 (a) (ii))1
Front Headlamp aim not tested (4.1.2 (b))1
Nearside Drive chain so loose it is likely to fail (6.1.7 (c) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Front Wheel spoke missing (5.2.2 (d))1
Front Wheel spoke excessively loose (5.2.2 (d))1
Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d))1
Motorcycle structure has excessive corrosion which adversely affects braking or steering REAR SWING ARM (6.1.1 (c) (ii))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Horn not working loose connection on horn (7.7 (a))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
All direction indicators missing (4.4.1 (a) (ii))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Rear Suspension arm pin or bush excessively worn swing arm bush (5.3.4 (a) (i))1
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii))1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Rear Suspension arm corroded and seriously weakened swinging arm.. (5.3.3 (b) (i))1
Rear Position lamp not working (4.2.1 (a))1
Drive chain excessively tight (6.1.7 (k) (i))1
Rear Suspension arm pin or bush excessively worn swing arm (5.3.4 (a) (i))1
Offside Front Footrest insecure Pin missing (6.2.12 (a))1
Brake pedal has insufficient reserve travel (1.1.2 (a))1
Footrest missing rears (6.2.12 (a))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy