Most common failures | No# failures |
---|
Headlamp aim out of alignment | 48 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Registration plate issues | 19 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Drive chain excessively loose |6.2.1d| | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Drive chain worn to excess |6.2.1e| | 8 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 7 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Drive chain excessively tight |6.2.1d| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Nearside Rear Direction indicators not working |1.5.1c| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 2 |
Registration plate lamp issues | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Horn not working |1.7.3a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Centre Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Centre Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Upper Motorcycle structure cracked |6.1.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front An item not tested |Manual| | 1 |
Front An item not tested |Manual| | 1 |
Rear An item not tested |Manual| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Centre Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Central Front Headlamp insecure replaced missing cowl bolt |1.2.3b| | 1 |
Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Brake hose damaged | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front suspension assembly component cracked |2.3.1| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Horn missing |1.7.1| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Headlamp aim not tested |1.6| | 1 |
An item not tested |Manual| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Nearside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Centre Exhaust mounting missing |7.1.1c| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Brake pedal insecure |1.1.2 |e| |i|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Offside Footrest insecure |6.2.12 |a|| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front wheel spindle loose |2.3.3a| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Rear Upper Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Centre Rear Upper Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system Silencer insecure |7.1.1.c| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Brake caliper leaking bleed nipple leaking |1.1.16 |b| |i|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Exhaust has a major leak of exhaust gases rear box rotton (6.1.2 (a)) | 1 |
Front Steering headbearing excessively stiff or notchy steering bearings notchy (2.2.2 (f) (i)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment Loose on spline fitment (1.1.15 (f)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Brake pedal pivot excessively tight (1.1.1 (a)) | 1 |
Nearside Rear Upper Engine mounting/bracket missing Nut missing (6.1.8 (a) (ii)) | 1 |
Nearside Direction indicator not working Left indicators not working all the time (4.4.1 (a) (ii)) | 1 |
Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Rear Wheel hub excessively damaged Hub has part of sprocket carrier missing (5.2.1 (b) (i)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Horn not working (7.7 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Drive chain so loose it is likely to fail adjusted as nec (6.1.7 (c) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Offside Front Throttle operating incorrectly Throttle Not Returning (6.2.7 (a) (i)) | 1 |
Offside Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |