Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Headlamp aim beam image kick up to the offside |1.6| | 9 |
Registration plate issues | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate lamp issues | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Centre Front Drive chain worn to excess |6.2.1e| | 1 |
Centre Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Centre Front Wheel spoke excessively loose |4.2.1b| | 1 |
Centre Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Centre Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Rear Drive chain worn to excess |6.2.1e| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Horn not working |1.7.3a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Wheel fixing missing |single fixing| split pin missing |5.2.1 |a| |ii|| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Drive chain excessively loose chain adjusted on test |6.2.1d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Front Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride nut missing |6.2.1h| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Headlamp aim beam image kick up to the offside headlight masked |1.6| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Throttle operating incorrectly throttle not returning |6.2.1f| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |