>

MOT History from tests of petrol HONDA WWs year 2022

Review the list of common HONDA WW failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:90.49%
(The average a petrol HONDA WW year 2022 passes without issue)
Based on:778 MOT Tests
Most common failuresNo# failures
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))8
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a))5
Rear Brake lever has insufficient reserve travel (1.1.2 (a))5
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))5
Front Wheel alignment incorrect which adversely affects the steering (2.4 (a))4
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))4
Front brake disc in such a condition that it is seriously weakened3
Headlamp aim out of alignment3
Front Steering operation restricted in free movement from lock to lock (2.1.4 (c))3
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Registration plate issues2
Nearside Brake lever has insufficient reserve travel (1.1.2 (a))2
Front Stop lamp not working (4.3.1 (a) (ii))2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Front Brake excessively binding (1.2.1 (f))2
Rear Brake excessively binding (1.2.1 (f))2
Front Brake grabbing severely (1.2.1 (c))2
Nearside Rear Shock absorber insecurely attached (5.3.2 (a) (i))1
Wheel alignment incorrect which adversely affects the steering (2.4 (a))1
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Nearside Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii))1
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii))1
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))1
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Rear Wheel excessively distorted (5.2.2 (c) (i))1
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle stuck (6.2.7 (a) (ii))1
Nearside Brake lever insecure (1.1.2 (e) (i))1
Offside Brake lever insecure (1.1.2 (e) (i))1
Rear Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))1
Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Rear reflector missing (4.8.2 (a) (ii))1
Stop lamp not working o/s control (4.3.1 (a) (ii))1
Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Throttle operating incorrectly (6.2.7 (a) (i))1
Rear Brake lever excessively worn (1.1.15 (b))1
Front Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Brake lever has restricted free movement (1.1.15 (e))1
Steering linkage component fractured to the extent that steering is affected (2.1.3 (c) (ii))1
Horn not working (7.7 (a))1
Front Brake disc fractured (1.1.14 (a) (ii))1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Fuel cap ineffective (6.1.3 (b) (i))1
Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a))1
Nearside Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))1
Offside Throttle operating incorrectly NOT RETURNING WHEN RELEASE (6.2.7 (a) (i))1
Offside Stop lamp not working STOP LAMP NOT WORKING WHEN APPLY FR BRAKE (4.3.1 (a) (ii))1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Rear Wheel fixing missing (multiple fixings) (5.2.1 (a) (i))1
Nearside Rear Brake lever has insufficient reserve travel Rear Brake Lever (1.1.2 (a))1
Rear Exhaust system insecure (6.1.2 (a))1
Front Headlamp insecure (4.1.1 (c))1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Handlebar mounting insecure handle bar rubber mounts too much movement (2.2.1 (a) (i))1
Nearside Rear Brake lever has insufficient reserve travel ADJUSTED REAR BRAKE (1.1.2 (a))1
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Brake performance unable to be tested (1.2.1 (g))1
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy