Most common failures | No# failures |
---|
Headlamp aim out of alignment | 35 |
Registration plate issues | 28 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 12 |
Registration plate lamp issues | 12 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not working (7.7 (a) (ii)) | 4 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 3 |
Horn not working |1.7.3a| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Nearside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Brake pedal anti-slip provision missing |1.1.2 |c|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Brake caliper insecure |1.1.16 |c| |i|| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Lower Suspension component corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Brake component damaged and seriously reduced in strength rear caliper |3.2.A1| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Front Direction indicator incorrect colour Lense missing (4.4.3 (a)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Rear Horn not working (7.7 (a) (ii)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Central Rear Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced swingarm (6.1.1 (c) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Position lamp not working Rear (4.2.1 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Central Rear Outer Position lamp not working rear tail lamp not working - bulb changed to correct (4.2.1 (a)) | 1 |
Central Rear Outer Position lamp not working rear lamp not illuminating, bulb changed to correct . (4.2.1 (a)) | 1 |
Rear Wheel bearing rough when rotated Possible brake caliper fault (5.1.3 (b) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Suspension arm corroded and seriously weakened main swing arm (5.3.3 (b) (i)) | 1 |
Offside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
Rear Brake performance not tested (1.2.1 (g)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Nearside Rear Upper Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Lower Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Lower Horn not working (7.7 (a)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Brake fluid not visible (1.1.10 (d) (iii)) | 1 |