| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 83 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 32 |
| Drive chain excessively loose |6.2.1d| | 27 |
| Registration plate issues | 26 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 25 |
| Rear reflector on motorcycle missing |1.4.1| | 22 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Rear reflector missing (4.8.2 (a) (ii)) | 16 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
| Drive chain worn to excess |6.2.1e| | 13 |
| Rear reflector on motorcycle obscured |1.4.1| | 10 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 9 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 9 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Throttle operating incorrectly |6.2.1f| | 8 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 8 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
| Rear Drive chain excessively loose |6.2.1d| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Rear reflector on motorcycle obscured |1.4.2b| | 6 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
| Registration plate lamp issues | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Rear Drive chain worn to excess |6.2.1e| | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Exhaust excessively deteriorated |7.1.1a| | 5 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 5 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Handlebar deformed |2.1.1b| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear Plate brake test indicates a sticking brake |3.3.B1a| | 3 |
| Nearside Front position lamp|s| missing |1.1.A.3a| | 3 |
| Offside Front position lamp|s| missing |1.1.A.3a| | 3 |
| Nearside Rear reflector missing |1.5.1a| | 3 |
| Offside Rear reflector missing |1.5.1a| | 3 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Riders seat insecure (6.2.5 (a) (ii)) | 3 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Front Exhaust excessively deteriorated |7.1.1a| | 2 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Stop lamp does not emit a steady light |1.3.1b| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Horn not working |1.7.3a| | 2 |
| Stop lamp emits other than a steady red light |1.3.1b| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |