| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 33 |
| Registration plate issues | 15 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 14 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 13 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 11 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 11 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 10 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 10 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Direction indicators not working |1.5.1c| | 7 |
| Exhaust excessively deteriorated |7.1.1a| | 6 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 6 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 5 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 5 |
| Horn not working |1.7.3a| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Direction indicator not working |1.5.1c| | 4 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Rear Direction indicator not working |1.5.1c| | 4 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Handlebar mounting clamp loose |2.1.1a| | 3 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Front Direction indicator not working |1.5.1c| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Horn is not continous or uniform |1.7.3c| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Horn sounds harsh or grating |1.7.3c| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 3 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Centre Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Upper Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear position lamp damaged and function impaired |1.1.1b| | 2 |
| An item not tested |Manual| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Steering linkage has excessive free play |2.2.2| | 2 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Brake lever has inadequate reserve travel both |3.1.3b| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Headlamp switch faulty |1.2.4| | 1 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Outer Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Outer Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Inner Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Inner Rear Lower Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Roller brake test indicates a binding brake Rear |3.3.A1a| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Offside Front Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. |2.3.8| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Centre Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Centre Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Centre Riders seat insecure |6.2.1a| | 1 |
| Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Offside Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Front Lower Brake component has an inadequate repair |3.1.5| | 1 |
| Front Lower Brake locking device insecure |3.2.A1e| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Stop lamp likely to become detached |4.3.1 |c| |ii|| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering front mud gaurd |2.1.2a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Handlebar mounting insecure |2.2.1 |a| |i|| | 1 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
| Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Nearside Rear Brake lever insecure |3.1.2a| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake cable knotted |3.2.A1b| | 1 |
| Headlamp switch faulty switch wrong way round. |1.2.4| | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Brake excessively binding Front (1.2.1 (f)) | 1 |
| Position lamp not working Front (4.2.1 (a)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Front Suspension component mounting has an unsafe modification (5.3.3 (c) (i)) | 1 |
| Rear Suspension component mounting has an unsafe modification (5.3.3 (c) (i)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Front Steering linkage insecure to the extent there is excessive movement at the mountings (2.1.3 (a) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect Rear shock absorber appears to be seized. (5.3.2 (b)) | 1 |
| Headlamp aim projected beam image obviously incorrect dip beam is main beam & vice versa (4.1.2 (c)) | 1 |
| Rear Shock absorber missing parts of the shock are missing so spring is moving freely (5.3.2 (a) (ii)) | 1 |
| Rear Shock absorber likely to become detached parts missing on shock , shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Offside Front Stop lamp not working control (4.3.1 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |