Most common failures | No# failures |
---|
Headlamp aim out of alignment | 36 |
Registration plate lamp issues | 34 |
Registration plate issues | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain worn to excess |6.2.1e| | 4 |
Horn not working |1.7.3a| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Exhaust is leaking and excessively noisey Clamp/Gasket missing |7.1.1b| | 1 |
Offside Front Brake hose leaking |1.1.12 |c|| | 1 |
Brake hose excessively deteriorated | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Stop lamp switch with a delay in operation On rear brake. |4.3.2 |a| |ii|| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
Brake performance not tested |3.3| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Brake excessively binding due to warped disc |1.2.1 |f|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Front position lamp obscured more than 50% |1.1.1d| | 1 |
Stop lamp does not illuminate immediately a brake applies Front brake |1.3.1a| | 1 |
Stop lamp not working stop light not working when front brake is applied |4.3.1 |a| |ii|| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Chain guard fouling another component |6.2.1c| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Handlebar retaining device loose |2.2.1 |b| |i|| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Exhaust has a major leak of exhaust gases clamp missing (6.1.2 (a)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working From front brake (4.3.1 (a) (ii)) | 1 |
Offside Front Upper Brake lever has restricted free movement (1.1.15 (e)) | 1 |
Offside Front Upper Steering operation impeded by a fairing front brake catching on fairing - have adjusted to operate safely (2.1.4 (e)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Central Front Upper Headlamp not working on dipped beam both dipped headlamp bulbs replaced (4.1.1 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |