Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 10 |
Registration plate issues | 8 |
Headlamp aim out of alignment | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain excessively tight |6.2.1d| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Offside Front Brake hose excessively twisted |3.2.B3a| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Riders seat insecure |6.2.1a| | 1 |
Nearside Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Front Footrest missing |6.2.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies does not work on front brake |1.3.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Brake disc|s| cracked both front |3.2.A1g| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Horn not working |1.7.3a| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake effort inadequate at a wheel does not work (1.2.1 (a) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Offside Front Brake disc contaminated oil on disc (1.1.14 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |