| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 46 |
| Rear reflector on motorcycle missing |1.4.1| | 40 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
| Registration plate issues | 15 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Steering headbearing has excessive free play |2.2.2| | 14 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Riders seat insecure |6.2.1a| | 12 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 10 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Horn not working |1.7.3a| | 8 |
| Rear Brake disc|s| cracked |3.2.A1g| | 8 |
| Offside Rear Footrest missing |6.2.1a| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Nearside Rear Footrest missing |6.2.1a| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Rear Drive chain excessively loose |6.2.1d| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Fuel system component insecure |7.2.1b| | 4 |
| Nearside Front Footrest insecure |6.2.1a| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
| An item not tested |Manual| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Front Riders seat insecure |6.2.1a| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Exhaust excessively deteriorated |7.1.1a| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Front Wheel damaged significantly reducing the original strength |4.2.1a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Chain guard insecure |6.2.1c| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Brake hose leaking fluid |3.2.B4| | 2 |
| Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Offside Footrest insecure |6.2.1a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Hub Nut |6.2.1h| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Brake lever attachment screws missing |3.1.2b| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Brake hose damaged | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Nearside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Outer Rear Drive chain worn to excess |6.2.1e| | 1 |
| Centre Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Chain guard fouling another component |6.2.1c| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Outer Front Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Exhaust is leaking and excessively noisey |nut missing from manifold | |7.1.1b| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Rear Brake hose excessively damaged Melted on exhaust |1.1.12 |b| |ii|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake lagging in operation |1.2.1 |d|| | 1 |
| Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam Switches to main |4.1.3 |b|| | 1 |
| Dipswitch does not operate immediately when selected on main beam Switches to dip |4.1.3 |b|| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Valve stem seriously damaged perished. (5.2.3 (j)) | 1 |
| Nearside Steering linkage locking device ineffective (2.1.3 (d)) | 1 |
| Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Offside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Brake disc insecure rear disc insecure two bolts missing dangerous to ride (1.1.14 (a) (ii)) | 1 |
| Rear Brake component inadequately mounted brake bracket worn (1.1.21 (c)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |